Video
38
NOTES
If there are blank sections between
recordings, the zero set memory may not
work correctly.
Locating the Beginning of a Recording
Date
You can locate the change of the date/
time zone with the date search function.
Press
or
on the wireless
controller.
• Press more than once to search for
further date changes (up to 10 times).
• To cancel the search press
.
NOTES
• The date search function will not detect
recordings shorter than 1 minute per
date/time zone.
• Date search may not function if the data
code is not displayed correctly.
Locating the End of the Last Scene
After playing back a tape, use this
function to locate the end of the last
scene recorded in order to continue
recording from that point.
POINTS TO CHECK
Stop the playback before using this
function.
[
END SEARCH]
[EXECUTE]
• “END SEARCH” appears.
• The camcorder rewinds/fast forwards
the tape, plays back the last few
seconds of the recording and stops
the tape.
• To cancel the end search push the
joystick (
) toward
.
NOTES
• End search cannot be used once you
remove the cassette.
• If there are blank sections between
recordings, the end search may not
work correctly.
• You cannot use the end search to locate
the end of a scene that was audio
dubbed.
(
STOP
(
FUNC.
FUNC.
CO
PY
