Canon 2234B014 - FAXPHONE L90 B/W Laser Reference Manual Download Page 96

Page: 96 / 193

Back

Next

Previous

TOP

7-2

Before Using the
Machine

Document and Paper

Sending and
Receiving

Copying

Printing

System Manager
Settings

Maintenance

Troubleshooting

Appendix

Index

Table of Contents

Cleaning the Machine

Note the following before cleaning your machine:

Make sure no document is stored in memory, and disconnect the
power cord.

Use a soft cloth to avoid scratching the components.

Do not use tissue paper, paper towels, or similar materials for
cleaning; they can stick to the components or generate static
charges.

Never use volatile liquids such as thinners, benzene, acetone, or any other
chemical cleaner to clean the machine. These can damage the machine
components.

When you disconnect the power cord, the documents stored in memory
will be erased. To check the jobs stored in memory, see the following:

Checking and Deleting Fax Documents Stored in Memory on p. 3-35
Checking and Deleting Print Jobs on p. 5-4

–

–
–

Exterior

Disconnect the power cord from the machine.

Wipe the machine’s exterior with a clean, soft,

lint-free cloth dampened with water or diluted
dishwashing detergent solution.

Wait for the machine to dry, then reconnect the

power cord.

Interior

Clean the machine’s print area periodically to prevent toner powder
and paper dust from accumulating inside.

Disconnect the power cord from the machine.

■

Summary of Contents for 2234B014 - FAXPHONE L90 B/W Laser


































































































































































































Search results

Summary of Contents for 2234B014 - FAXPHONE L90 B/W Laser

Reviews:

Related manuals for 2234B014 - FAXPHONE L90 B/W Laser

Brands by name

Popular brands

Canon 2234B014 - FAXPHONE L90 B/W Laser, Reference Manual

Search results

Summary of Contents for 2234B014 - FAXPHONE L90 B/W Laser

Reviews:

Related manuals for 2234B014 - FAXPHONE L90 B/W Laser

Brands by name

Popular brands