1
2
3
4
5
6
7
8
9
Back
Next
Previous
TOP
8-3
Before Using the
Machine
Document and Paper
Sending and
Receiving
Copying
Printing
System Manager
Settings
Maintenance
Troubleshooting
Appendix
Index
Table of Contents
Clearing Jams
When < CHECK DOCUMENT> or <PAPER JAM/OPEN TONER
COVER> appears on the LCD display, remove jammed paper
from the machine first, then from the paper feeder if necessary.
Check the following if you experience repeated paper jams:
Fan and tap the paper stack on a flat surface before loading it in
the machine.
Check that the paper you are using meets the requirements for
use. (See “Paper Requirements,” on p. 2-5.)
Make sure you have removed any scraps of paper from the inside
of the machine.
When removing jammed documents or paper, take care not to cut your
hands on the edges of the document or paper.
When removing jammed paper or when inspecting the inside of the
machine, do not allow necklaces, bracelets, or other metal objects to
touch the inside of the machine, as this may result in burns or electrical
shock.
If you tear the paper, remove any torn pieces to avoid further jams.
If loose toner comes into contact with your skin or clothing, wash with
cold water. Warm water will set the toner.
–
–
–
–
–
–
–
Do not force a jammed document or paper out of the machine. Contact
Canon Customer Care Center if needed.
Document Jams
When <CHECK DOCUMENT> appears on the LCD display, remove a
jammed document from the ADF.
1.
Lift the document release lever.
If a multi-page document is loaded, remove the entire document
from the ADF.
■
