Canon 2234B014 - FAXPHONE L90 B/W Laser Reference Manual Download Page 117

Page: 117 / 193

Back

Next

Previous

TOP

7-23

Before Using the
Machine

Document and Paper

Sending and
Receiving

Copying

Printing

System Manager
Settings

Maintenance

Troubleshooting

Appendix

Index

Table of Contents

Transporting the Machine

Follow this procedure to avoid vibration damage to the
machine when transporting it over a long distance.

Disconnect the power cord and all the cables

from the back of the machine.

Close the paper delivery tray extension (A), and

then the paper delivery tray (B) itself.

Do not close the paper delivery tray without folding the extension
first.

Open the toner cover by the notch (A).

Summary of Contents for 2234B014 - FAXPHONE L90 B/W Laser


































































































































































































Search results

Summary of Contents for 2234B014 - FAXPHONE L90 B/W Laser

Reviews:

Related manuals for 2234B014 - FAXPHONE L90 B/W Laser

Brands by name

Popular brands

Canon 2234B014 - FAXPHONE L90 B/W Laser, Reference Manual

Search results

Summary of Contents for 2234B014 - FAXPHONE L90 B/W Laser

Reviews:

Related manuals for 2234B014 - FAXPHONE L90 B/W Laser

Brands by name

Popular brands