Pre-Recording
92
Pre-Recording
When pre-recording is activated, the camcorder starts recording continuously into a temporary memory (approx.
3 seconds) so when you press the REC button, the clip will contain also a few seconds of video and audio
recorded before you pressed the button.
1 Pre
ss
the PRE REC button.
• Pre-recording is activated and
z
appears at the top of the
screen.
• Press the button again to turn off pre-recording.
2 Pre
ss
the REC button.
• The clip recorded on the card will include a few seconds of
video and audio recorded before the REC button was pressed.
NOTES
NOTES
• The camcorder will not record the full 3 seconds prior to pressing the REC button if the button was pressed
within 3 seconds of having turned on pre-recording or having finished the previous recording.
• Pre-recording will be deactivated in the following cases:
- If the position of the mode switch was changed.
- If the menu was opened.
- If the shooting mode, white balance or look was changed.
• About the time code when pre-recording is activated:
- The time code of the clip will start a few seconds before the REC button was pressed.
- The time code will be recorded with the running mode set to [
Free Run].
- If the time code mode was set to [
Regen.], or to [
Preset] with [
Rec Run] running mode, the
time code running mode will be changed automatically to [
Free Run] when pre-recording is activated.
- When pre-recording is turned off, the time code running mode will return to its previous setting.
Operating modes:
