81
S
etting the U
s
er Bit
Setting the User Bit
The user bit display can be selected from the date or the time of recording, or an identification code consisting of
8 characters in the hexadecimal system. There are sixteen possible characters: the numbers 0 to 9 and the
letters A to F. The user bit can be recorded with XF-AVC clips and output from the SDI OUT terminal (
m
only) and HDMI OUT terminal.
Setting an Hexadecimal Code
1 Open the u
s
er bit
s
etting
s
creen.
>
[
3
$
Recording Setup]
>
[User Bit Type]
>
[
Setting]
>
[
i
]
• The user bit setting screen appears with an orange selection frame on the leftmost digit.
• Touch [Reset] to reset the user bit to [00 00 00 00] and return to the previous screen.
2 Touch [
Í
] or [
Î
] to
s
et the fir
s
t character and then touch the field next to it to
s
elect it.
• Change the rest of the characters in the same way.
3 After completing all the character
s
of the u
s
er bit, touch [OK].
• Touch [Cancel] to close the screen without changing the user bit.
Using the Date or Time
1
S
elect [U
s
er Bit Type].
>
[
3
$
Recording Setup]
>
[User Bit Type]
2 Touch [
Date] or [
Time] and then touch [
X
].
Operating modes:
