27
Preparing the Camcorder
To u
s
e the wirele
ss
controller
Point the wireless controller at the camcorder’s remote sensor
when you press the buttons.
• You can rotate the LCD panel 180 degrees to use the wireless
controller from the front of the camcorder.
NOTES
• When the camcorder cannot be operated with the wireless
controller, or when it can only be operated at very close range, replace the battery.
• The wireless controller may not work properly when the remote sensor is situated under strong light sources or
direct sunlight.
Using a Tripod
You can mount the camcorder on a tripod but do not use tripods
with mounting screws longer than 6 mm (0.24 in.) as this may cause
damage to the camcorder.
