Canon 2213C002, Instruction Manual

Page: 149 / 183

149
Menu Option s
[AF Mode] [ AF-Boosted MF], [ Continuous] (
A
56,
57)
[AF Frame Size] [
k
Automatic], [
r
Large] , [
s
Small] (
A
57)
[AF Speed] [
Z
Fast], [
[
Normal] , [
]
Slow] (
A
58)
[AF Response] [
Z
Fast], [
[
Normal] , [
]
Slow] (
A
58)
[Face Detection & Tracking] [
i
On
}
] , [
j
Off] (
A
58)
[Focus Guide] [
i
On] , [
j
Off] (
A
54)
[Focus Preset Speed] [
Z
Fast], [
[
Normal] , [
]
Slow] (
A
54)
Determines the speed at which the focus changes to the preset position.
[Auto Backlight Correction] [
i
On] , [
j
Off] (
A
73)
[Auto Slow Shutter] [
i
On] , [
j
Off]
The camcorder automatically uses slow shutter speeds to obtain brighter recordings in places with
insufficient lighting.
• When this setting is set to [
i
On], the fastest shutter speed used is: 1/30 (59.94P),
1/15 (29.97P) or 1/12 (23.98P).
• Auto slow shutter can be activated only during mode, when the shooting mode is set to
’
or when infrared recording is activated.
• If a trailing afterimage appears, set the auto slow shutter to [
j
Off].
[Flicker Reduction] [
j
Off] , [
k
Automatic]
When this setting is set to [
k
Automatic], the camcorder will automatically detect and reduce
flicker.
• When recording under light sources such as fluorescent, mercury or halogen lamps, the screen
may flicker depending on the shutter speed. You may be able to avoid flicker by setting the shutter
speed mode to a value matching the frequency of the local electrical system: 1/100 for 50 Hz
systems, 1/60 for 60 Hz systems.
[Conversion Lens] [
¾
TL-U58], [
¿
WA-U58], [
j
Off]
When you attach to the camcorder the optional TL-U58 Tele-converter or WA-U58 Wide Attachment,
set the appropriate conversion lens setting. The image stabilization method and minimum focusing
distance will change according to the accessory used. The minimum focusing distance throughout
the entire zoom range will be 130 cm (4 ft. 3 in.) for the tele-converter and about 60 cm (2 ft.) for the
wide attachment.
• The tele-converter increases the focal length of the lens by a factor of approx. 1.5. The wide
attachment reduces the focal length of the lens by a factor of approx. 0.8.
• The approximate focusing distance displayed on the screen will change depending on the setting.
If you are not using an optional conversion lens, select [
j
Off].
• When a setting other than [
j
Off] is selected, the [
v
Camera Setup]
>
[AF Mode] setting will
not be available.
[Image Stabilizer] [
®
Off], [
¯
Standard] , [
°
Dynamic] (
A
65)
[Powered IS Button] [
Î
Press and Hold] , [
Ï
Toggle On/Off]
Determines the operation mode of the POWERED IS button (
A
65).
[
Î
Press and Hold]: Powered IS will be activated while you hold the button pressed down.
[
Ï
Toggle On/Off]: Each press of the button will turn the Powered IS function on and off.
[Set WB Priority] [ Automatic] , [
¼
Daylight], [
É
Tungsten], [ Color Temperature], [ Set 1], [ Set 2]
You can press an assignable button set to [ WB Priority] to switch between the current white
balance and the white balance setting selected for [Set WB Priority].
[Focus Ring Direction] [
h
Normal] , [
X
Reverse]
Changes the direction the focus/zoom ring needs to be turned when using it to adjust the focus (when
the focus/zoom ring switch is set to FOCUS).
Menu item Setting options and additional information