Connecting to an External Monitor or Recorder
120
NOTES
•
m
The camcorder cannot output signals to the SDI OUT terminal and HDMI OUT terminals
simultaneously.
• Depending on the external recorder used, you may not be able to record on the external recorder using the
selected output video configuration.
• After connecting the camcorder to an external recorder, make test recordings using the video configuration(s)
you plan to use and check the recordings made by the external recorder.
• You can set [
3
Recording Setup]
>
[Rec Command] to [
i
On] to use the camcorder’s REC button to
control also the recording operation of external recorders compatible with recording commands.
• About the time code during external recording-only mode:
- The time code mode is automatically set to [
Preset].
- When the camcorder is set back to internal recording-priority mode, the time code mode will return to its
previous setting.
Using the SDI OUT Terminal
The digital signal that is output from the SDI OUT terminal (
m
only) includes the video signal, audio signal
(up to 4 channels), time code and recording command. You can output also the onscreen displays (
A
Selecting the Output Terminal
1
S
elect [Output Terminal].
>
[
£
!
Display Setup]
>
[Output Terminal]
2 Activate the
S
DI OUT terminal and then touch [
L
].
• Touch [
ø
SDI] (SDI OUT terminal).
3
S
elect [3G-
S
DI Mapping].
>
[
£
"
Display Setup]
>
[3G-SDI Mapping]
4
S
elect the de
s
ired option and then touch [
X
].
• You can select a video output signal compliant with Level A or Level B of the SMPTE ST 425-1 standard.
NOTES
• When slow & fast motion recording is activated, the time code signal cannot be output from the SDI OUT
terminal (
m
only).
Operating modes:
