manualshive.com logo in svg

Canon 2207C001, User Manual

The Canon 2207C001 User Manual is a comprehensive guide designed to assist you in harnessing the full potential of your device. Find detailed instructions and valuable insights to optimize performance and explore all its features. Download this manual for free from manualshive.com and unlock endless possibilities for your Canon 2207C001.

Share
Download
background image

Maintenance and Inspections

2357-004

Clean this machine periodically. If dust accumulates, the machine may not operate properly. When cleaning, be sure to

observe the following. If a problem occurs during operation, see  Troubleshooting(P. 227)  . If the problem cannot

be resolved or you feel the machine requires an inspection, see  When a Problem Cannot Be Solved(P. 266)  .

●

Before cleaning, turn OFF the power and unplug the power plug from the AC power outlet. Failure to do so
may result in a fire or electrical shock.

●

Unplug the power plug periodically and clean with a dry cloth to remove dust and grime. Accumulated dust
may absorb humidity in the air and may result in a fire if it comes into contact with electricity.

●

Use a damp, well wrung-out cloth to clean the machine. Dampen cleaning cloths with water only. Do not use
alcohol, benzine, paint thinner, or other flammable substances. Do not use tissue paper or paper towels. If
these substances come into contact with electrical parts inside the machine, they may generate static
electricity or result in a fire or electrical shock.

●

Check the power cord and plug periodically for damage. Check the machine for rust, dents, scratches,
cracks, or excessive heat generation. Use of poorly-maintained equipment may result in a fire or electrical
shock.

●

The inside of the machine has high-temperature and high-voltage components. Touching these components
may result in burns. Do not touch any part of the machine that is not indicated in the manual.

●

When loading paper or removing jammed paper, be careful not to cut your hands with the edges of the
paper.

●

When removing jammed paper or replacing toner cartridges or the like, be careful not to get any toner on
your hands or clothing. If toner gets on your hands or clothing, wash them immediately with cold water.

Important Safety Instructions

8

Summary of Contents for 2207C001












































































































































































































































































































































Reviews:

No comments

Related manuals for 2207C001

Ricoh Aficio SP C420DN Brochure & Specs preview
Aficio SP C420DN
Brand: Ricoh Pages: 4
SEWOO LK-P24 Quick Manual preview
LK-P24
Brand: SEWOO Pages: 17
UEi KMIRP2 Instruction Manual preview
KMIRP2
Brand: UEi Pages: 4
Star Star NX-500 User Manual preview
Star NX-500
Brand: Star Pages: 88
Fuji Xerox DocumentCentre C240 Series User Manual preview
DocumentCentre C240 Series
Brand: Fuji Xerox Pages: 275
SATO LC400e Series Programming Reference Manual preview
LC400e Series
Brand: SATO Pages: 255
VASTEX E20-2024 Assembly And Operation Instructions Manual preview
E20-2024
Brand: VASTEX Pages: 8
Brady BradyJet J4000 User Manual preview
BradyJet J4000
Brand: Brady Pages: 48
Graphic Products DuraLabel 4 User Manual preview
DuraLabel 4
Brand: Graphic Products Pages: 28
Ultimaker Heated Bed Upgrade Kit Assembly Manual preview
Heated Bed Upgrade Kit
Brand: Ultimaker Pages: 37
Oki C6150dn Manual De L'Utilisateur preview
C6150dn
Brand: Oki Pages: 309
EcLine EC-PM-80320D User Manual preview
EC-PM-80320D
Brand: EcLine Pages: 72
Konica Minolta BIZHUB PRO 1050P User Manual preview
BIZHUB PRO 1050P
Brand: Konica Minolta Pages: 588
Copystar CS 6501i Quick Manual preview
CS 6501i
Brand: Copystar Pages: 2
Opt Lasers PLH3D-2W Quick Setup Manual preview
PLH3D-2W
Brand: Opt Lasers Pages: 69
Tachosys digiprint Instruction Manual preview
digiprint
Brand: Tachosys Pages: 5
Bang & Olufsen BEOLINE Quick Start Manual preview
BEOLINE
Brand: Bang & Olufsen Pages: 4
Perel PMG06 User Manual preview
PMG06
Brand: Perel Pages: 13

Brands by name

Popular brands

Load more brands