Canon 1750, Service Manual

Page: 110 / 358

2
2
2-82
2-82
Technical Explanation > Embedded RDS > E-RDS Setup > COM-LOG Report
Technical Explanation > Embedded RDS > E-RDS Setup > COM-LOG Report
■
Initializing E-RDS settings
It is possible to return E-RDS Settings to factory-shipments value.
● Initialization procedure
1. Start [Service Mode].
For the procedures, see “Steps to E-RDS settings - step 1.“.
2. Select #CLEAR > ERDS-DAT and touch the [OK] button.
● Setting values and data to be initialized
The following E-RDS settings, internal data, and Alarm filtering information are initialized.
• #E-RDS > E-RDS SWITCH
• #E-RDS > RGW-ADDRESS
• #E-RDS > RGW-PORT
• #E-RDS > COM-LOG
CAUTION:
In case of replacing the CA certificate file, even if initialization of E-RDS is executed, the
status is not returned to the factory default.
When installing the certificate file other than the factory default CA certificate file, it is
required to delete the certificate file after E-RDS initialization and install the factory
default CA certificate file.
For detailed procedures, see "Steps to E-RDS settings - step 3.".
■
COM-LOG Report
A report of communication error log information on five affairs can be output.
● Report output procedure
1. Start [Service Mode].
For the procedures, see “Steps to E-RDS settings - step 1.“.
2. Select #REPORT > REPORT OUTPUT > ERDS COM LOG LIST, and touch the [OK]
button.
Output sample
19/05 2011 10:14
*****************************
*** E-RDS-COM-LOG ***
*****************************
No.01 DATE 19 05 2011 TIME 03:21 CODE 05000003
Information SUSPEND: Communication test is not performed.
No.02 DATE 19 05 2011 TIME 03:21 CODE 00000000
Information SUSPEND: mode changed.
No.03 DATE 19 05 2011 TIME 03:18 CODE 05000003
Information SUSPEND: Communication test is not performed.
No.04 DATE 19 05 2011 TIME 03:18 CODE 00000000
Information SUSPEND: mode changed.
No.05 DATE 19 05 2011 TIME 01:56 CODE 05000003
Information SUSPEND: Communication test is not performed.