Customizing the System Settings
4-9
Cu
sto
m
izing Set
ti
ngs
4
●
To specify the System Manager ID and System Password:
❑
Click [Register ID and Password] on the Edit System Settings page.
For help, see the screen shot in “To specify the System Settings:,” on p. 4-5.
The Register ID and Password page is displayed.
❑
Specify the necessary settings
➞
click [OK].
The settings are as follows:
IMPORTANT
The System Manager ID and System Password are both set to ‘7654321’ at
purchase. Change them before using the machine.
IMPORTANT
<Permit End-user’s Job Operation> can be specified only on the Remote UI.
Set ID and
Password:
Select this check box to set the System Manager ID and
System Password.
System Manager ID: Enter the System Manager ID (seven digits maximum).
Set/Change
Password:
Select this check box to set or change the System Password.
System Manager
Password:
Enter the System Password (seven digits maximum).
Confirm:
Enter again the password to confirm it.
Permit End-user’s
Job Operation:
When this check box is selected, print jobs can be deleted in
the End-User Mode under the user name entered when
logging in.
Summary of Contents for 1750
