Canon 1418C025 User Manual Download Page 378

Page: 378 / 466

Fixing Assembly

19Y4-06H

Dirt may adhere to the fixing units inside the machine and cause black streaks to appear on printouts. To clean the

fixing unit, perform the following procedure. Note that you cannot clean the fixing unit when the machine has

documents waiting to be printed. To clean the fixing unit, you need paper larger than plain A4 or Letter size paper. Set

the paper in the manual feed slot before performing the following procedure.

●

Cleaning consumes the toner cartridge. Make sure that there is sufficient toner cartridge remaining
beforehand.

●

It takes approximately 90 seconds to clean the fixing assembly.

Checking Toner cartridge Level(P. 376)
Loading Paper in the Manual Feed Slot(P. 41)

Press

Use

to select <Adjustment/Maintenance>, and press

Select <Clean Fixing Assembly>, and press

Load paper (A4/LTR or larger) in the manual feed slot, and press

●

After cleaning is completed and the message <Finished.> appears, press

to return to the copy mode

screen.

Maintenance

372

Summary of Contents for 1418C025



















































































































































































































































































































































































































































































Search results

Summary of Contents for 1418C025

Reviews:

Related manuals for 1418C025

Brands by name

Popular brands

Canon 1418C025, User Manual

Search results

Summary of Contents for 1418C025

Reviews:

Related manuals for 1418C025

Brands by name

Popular brands