Canon 1293B002AA/006AA - Lcos Xga Projector, User Manual, Page: 78 / 188

Setting Display Status
78
Selecting an Input Signal
Type (Analog PC)
[Input signal select]
You can select a suitable resolution if auto
PC adjustment function (
P51 ) cannot
project the correct image from a computer.
Press the
OK
button to accept your setting
and then press the
MENU
button.
Select an input signal corresponding to
the resolution of the computer.
• For the signal types supported by the pro-
jector, see the table on page 175 .
Selecting an Input Signal
Type (Component)
[Input signal select]
You can select the proper component sig-
nal type if the video image from AV equip-
ment is not projected correctly.
Press the
OK
button to accept your setting
and then press the
MENU
button.
• [Auto] is the factory default.
• Refer to the manual for the AV equipment
connected to the projector to confirm the
component signal type.
HDMI Component
Digital PC Analog PC
Display settings
Input signal select
HDMI Component
Digital PC Analog PC
Display settings
Input signal select