39
User’s Manual
Projectin
g
an Ima
g
e
Connecting the Projector
Connecting the Projector to a Computer
Connect the projector to the computer.
A digital connection (
) is recommended when projecting a WUXGA or UXGA image in
high quality.
When using a computer with an HDMI output terminal, a digital connection (
made using an HDMI cable.
■
Connecting to RGB Monitor Output Terminal (Analog Connection)
VGA cable (Input signal type: [Analog PC] –
)
Before connecting the cables, turn off both the projector and computer.
• Use a VGA cable in which all pins are connected. If the cable is a type in which all pins
are not connected, the image may not be correctly displayed.
• Use an audio cable without a built-in resistor. Using an audio cable with a built-in resistor
will reduce the audio volume.
Computer
Monitor output ter-
minal
(mini D-sub 15-pin)
AUDIO OUT terminal
(AUDIO OUT)
VGA cable (supplied)
When inputting corresponding audio.
Audio cable (not included)
To ANALOG PC / COM-
PONENT IN
To AUDIO IN
Projector
Summary of Contents for 1293B002AA/006AA - Lcos Xga Projector
