Canon 1293B002AA/006AA - Lcos Xga Projector, User Manual, Page: 148 / 188

Setting Up the Network
148
■ Setting Up Email [Mail]
From [Mail] in the settings window, you can set the items necessary to send error
mails and test mails. For the setting procedure, refer to “Displaying and Configuring
the Network Configuration Screen” (
P142 ).
Item Explanation Factory default setting
To: Enter the recipient address for error
mails in 1-byte alphanumeric char-
acters and symbols (1 - 63 charac-
ters). MailUserAccount
Cc: Enter the CC address for error mails
in 1-byte alphanumeric characters
and symbols (1 - 63 characters). <Blank>
From: Enter the sender address for error
mails in 1-byte alphanumeric char-
acters and symbols (1 - 63 charac-
ters). Projector@canon.co.jp
SMTP server IP address Enter the SMTP server IP address in
1-byte numbers. 0.0.0.0
SMTP server port number Enter the SMTP server port number
in 1-byte numbers (1 - 65535). 25
SNTP server IP address Enter the SNTP server IP address in
1-byte numbers. 0.0.0.0
Time zone Select the time zone where the pro-
jector is used. (GMT) Dublin, Lisbon,
London
Mail resend interval Enter the interval for resending mail
when an error occurred (units: sec-
onds) within the range of 0 - 59 sec-
onds using 1-byte numbers. 10
Mail resend times Enter the number of times to resend
mail when an error occurred within
the range of 0 - 255 using 1-byte
numbers. 3
Error report Select whether to turn the error mail
sending function on or off. OFF