Canon 08011-41-UD2-003 Installation And Configuration Manual Download Page 106

Page: 106 / 176

106

Authorized Send Installation and Configuration Guide for imageRUNNER Machines

3.13 Editing a Preset Share

You can edit a previously created preset share from the Scan to Folder configuration
screen.

Click [Scan to Folder]

➞

[Preset Shares]

➞

select the check box next to the preset

share you want to edit

➞

click [Edit].

Edit the settings for the preset share as necessary

➞

click [Update].

If you make a mistake, click [Reset] to return the settings to their original values.

To cancel editing the preset share and return to the Scan to Folder configuration
screen, click [Cancel].

Summary of Contents for 08011-41-UD2-003

















































































































































































Search results

Summary of Contents for 08011-41-UD2-003

Reviews:

Related manuals for 08011-41-UD2-003

Brands by name

Popular brands

Canon 08011-41-UD2-003, Installation And Configuration Manual

Search results

Summary of Contents for 08011-41-UD2-003

Reviews:

Related manuals for 08011-41-UD2-003

Brands by name

Popular brands