Canon 0575B002 User Manual Download Page 91 | Manualshive

Page: 91 / 129

background image

Chapter 10

89

Troubleshooting

Cannot See The Display On The LCD/LED

E, 9

Depending on the model or brand of your device, you may have to select a
print mode compliant with PictBridge before connecting the device.
You may also have to turn on the device or select Play mode manually
after connecting the device to the machine. Perform necessary operations
according to the instruction manual supplied with your device.
If the error is still unresolved, there is a possibility that you are using a
digital camera or digital video camcorder that is not supported by this
machine. Use a digital camera or digital video camcorder compatible with
this machine.

E, 1, 4

The FINE Cartridge may not be the compatible with this machine. Install
the appropriate FINE Cartridge. If lines are misaligned or the resulting
output is not satisfactory, carry out the FINE Cartridge Alignment.

E, 1, 5

FINE Cartridge errors have occurred. Replace the FINE Cartridge.

E, 1, 6

This FINE Cartridge may have previously been used, or the ink may have
run out. The function for detecting the remaining ink level will be disabled
since the remaining ink level cannot be correctly detected. If you want to
continue printing without this function, press [Black] or [Color]. Canon
recommends to use new genuine Canon Cartridges in order to obtain
optimum qualities.

E, 1, 9

The size of the document cannot be correctly detected or the document is
too small when the Fit-to-Page copying is selected. Make sure the
document meets the requirements and correctly loaded on the Platen
Glass. Then reload the document and press [Black] or [Color]. See
“Setting Documents” on page 15

E, 2, x
E, 3, x
E, 4, x

An error requiring servicing might have occurred. Turn OFF the machine,
and unplug the power cord of the machine from the power supply. After a
while, plug the power cord of the machine back in and turn ON the
machine. If the same error occurs, contact a Canon service representative.

Cause

Action

The Machine is not turned ON.

You have not pressed [ON/OFF].
The machine will power ON and the LCD/LED will display a message when
you connect the power cord and press [ON/OFF].

The LCD/LED may be in the Power
Saver mode.

Press any button on the Operation Panel except for [ON/OFF] to restore
the display.

Message

Action

«
...
89
90
91
92
93
...
»

Summary of Contents for 0575B002


































































































































Reviews:

No comments

Related manuals for 0575B002

Brand: Xerox Pages: 8

Brand: EASYPRINT Pages: 37

Brand: Samsung Pages: 549

Brand: Canon Pages: 21

Brand: Canon Pages: 23

Brand: FujiFilm Pages: 37

Brand: Xerox Pages: 14

275C - SRP Two-color Dot-matrix Printer

Brand: BIXOLON Pages: 100

Magicolor 4650DN

Brand: Konica Minolta Pages: 260

Brand: Lexmark Pages: 729

Jetrix LXi Series

Brand: InkTec Pages: 3

Brand: Oki Pages: 64

Brand: Konica Minolta Pages: 102

Brand: MINOLTA-QMS Pages: 48

Brand: Matan Pages: 8

Brand: Utax Pages: 488

Brand: Ricoh Pages: 24

WorkCentre 5325

Brand: Xerox Pages: 222

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands