background image

1

Please note that the specifications and information in this manual are subject to change for product 
improvement.  For the latest product information, go to 

http://www.cannondale.com/tech/.

READ THIS MANUAL CAREFULLY!

It contains important safety information.

Keep it for future reference

.

perp 

Owner’s Manual Supplement

120027.PDF

CONTENTS

SAFETY INFORMATION  ...........................

About This Supplement .......................

2

Safety Messages ....................................

2

Intended Use ..........................................

3

ABOUT FREERIDING & DOWNHILL ....... 4
BUILDING UP A FRAMESET ...................6
SELECTING REAR SHOCKS .....................6
SAG   .......................................................6
CHAIN LENGTH ...................................... 7
CHAIN RETENTION DEVICES .................. 7
MAXIMUM FORK LENGTH ..................... 8
SELECTTING TIRES ..................................9
CABLE ROUTING ...................................10

LINE & CABLE FRAME PROTECTION  .....12
HOUSING GUIDES & CABLE STOPS ......13
BB FD CABLE GUIDE ..............................13
CHAINSTAY PROTECTOR .......................13

MAINTENANCE .....................................

14

About Cleaning ....................................

15

Tightening Torques .............................

15

REAR SHOCK ........................................20

Changing Travel ...................................

17

SHOCK LINK ..........................................18
BUSHING PRESS TOOL .........................20
SWINGARM PIVOT ............................... 24
SELECTING TIRES .................................. 23
BRAKE LINK .......................................... 26

REAR AXLE/ DROPOUTS ......................

28

Wheel Truing Tool ..............................

29

GEOMETRY ...........................................

30

SPECIFICATIONS ....................................

31

REPLACEMENT PARTS ..........................

32

Summary of Contents for 120027.PDF

































Reviews: