Cannon Latitude, Instruction Manual, Page: 24 / 38

Placement of Flame Spreader:
Prior to fitting the Firewood beds onto the burners,
the Flame Spreaders must be placed in position.
The Flame spreaders are located at the front of the
burners and assist the flame to spread from one
burner to the next. The firewood beds sit on the
flame spreaders locating them in place.
Removal of gas valve cover is done by removing screw
on right side of valve. The outer glass should be
removed prior to this.
Locate gas valve as shown in Installation
Instructions on Fig 36, pg 21. The Gas Valve
cover is removed from the heater by undoing
a screw on the right side of the cover. See fig.
Remove plastic cap from the Pressure
Adjutsment (see FIG 37) , using a screw driver
to pry off.
SCREW FOR REMOVAL
OF VALVE COVER
23