74
CANNON
®
Mini-Rotary Viscometer
CMRV-5000
Instruction & Operation Manual
Version 1.0b—August, 2011;
CANNON
®
Instrument Company
2139 High Tech Road • State College, PA • 16803 • USA
show previous samples
box if you do not wish to display samples
tested prior to the time the analysis is opened.
Use the spin controls to select the Sample Time Window (the desired
range of recent samples to be included in the analysis). Data from
samples tested within [x] hours will be displayed in the analysis. Note
that the analysis sorting options are disabled if you are using
Dynamic
Update
.
EXAMPLE
If the
Do not show previous samples
box was unchecked and a Sample
Time Window value of 5 hours was selected, the analysis (when opened)
would display data for all samples tested within the last five hours.
Using the sample/error filter
Use the sample filter to limit the analysis to samples which have been
tested with certain instruments, profile names, by certain technicians, or
which have certain Sample ID characteristics. To filter samples using
these variables, click the
Sample Filter
tab from the analysis configura-
tion window.
NOTE
For the error analysis, this tab is labelled
Error Filter
and the filter options
are limited to instrument and technician).
Then select the desired instruments and profile names from their respec-
tive list boxes. To select a range of profile names/instruments, click on
the first desired item and then hold down the
S
key while clicking
on the last desired item in the sequence. To individually select profile