Enter 199 End
*/$%ENTR*
*ZEND*
7. General Configuration Setting
7-3-27 Double Confirm Count
The Count of repeatedly confirmations
*A59E0*
Configuration Range
Default Setting
1-10
1
Procedure:
(A) Scan “Enter” barcode
(B) Scan “Confirm Count” barcode
(C) Scan parameters from Hexadecimal / Decimal table
(D) Scan “OK“ barcode
(E) Scan “End” barcode
7-3-28 Continue Mode Clear Time
When the clearance time of scanner connects with USB Cable, after long time can be
set to scan the same code can only be used under the "Continue" mode.
*A5AE0*
Procedure:
Example:
(A) Scan “Enter” barcode
(B) Scan Transmission Timeout
barcode
(C) Scan parameters from
Hexadecimal / Decimal table
(D) Scan “OK“ barcode
(E) Scan “End” barcode
If configuration is 0.2 sec, the
parameter value is 0.
2 sec / 0.01 sec
= 20
0~2.55 Sec
0.01Sec
0.5Sec
0~2.55 Sec
0.01Sec
0.5Sec
7-3-27 Double Confirm Count
7-3-28 Continue Mode Clear Time