Enter 183 End
*/$%ENTR*
*ZEND*
7. General Configuration Setting
7-2-4-5 Retransmission Count
To avoid data transmission loss, messages sometimes have to be resent due
to a failure to receive ACK signal.
*AE9E0*
Procedure:
Example:
(A) Scan “Enter” barcode
(B) Scan”Retransmission Count”
barcode
(C) Scan parameters from
Hexadecimal / Decimal table
(D) Scan “OK“ barcode
(E) Scan “End” barcode
If configuration is.2 sec, the
parameter value is
2 sec / 1 sec = 2
7-2-3-6 ACK Timeout
When the data set sent, how long shall receive ACK
*AEAE0*
Procedure:
Example:
(A) Scan “Enter” barcode
(B) Scan “ACK Timeout” barcode
(C) Scan parameters from
Hexadecimal / Decimal table
(D) Scan “OK“ barcode
(E) Scan “End” barcode
If configuration is.2 sec, the
parameter value is
2 sec / 1 sec = 2
Configuration Range
Unit
Default Setting
2 ~ 255 sec
1 sec
3