Enter 107 End
*/$%ENTR*
*ZEND*
6. Memory / Bluetooth General Setting
6-2-16 Normal Vibrator
Normal Event Vibrator is used to give a vibration signal whenever certain
operations, such as switching operation modes, entering data transmission
mode, and battery charge, are initiated by using Scan Button or Small Trigger
so that LED indicator accordingly changes its blinking frequency or color. Scan
the appropriate barcode to enable or disable Normal Event Vibrator.
*C4620*
Disable
*C4621*
Enable
6-2-17 Viberator Time
Please follow the below steps to specify the length of time the device stays in a
state of vibration when a barcode is decoded successfully
*C5AE0*
Configuration Range
Unit
Default Setting
0.02 Secs ~ 2.55 Secs
0.01 Sec
0.05 Secs
Procedure
(A) Scan “Enter” barcode
(B) Scan “Viberator Time” barcode
(C) Scan parameters from Hexadecimal / Decimal table
(D) Scan “OK“ barcode
(E) Scan “End” barcode
6-2-16 Normal Vibrator
6-2-17 Viberator Time