Enter 103 End
*/$%ENTR*
*ZEND*
6. Memory / Bluetooth General Setting
6-2-8 Stand by Time
After lengthy idleness, the device will first be put into standby state in which the
machine is still able to react to the emergent request yet running in lower
power consumption. This parameter refers to the amount of time allocated for
the device to stay in standby before being totally shut down.
*C5FE0*
Configuration Range Unit
Default Setting
10 Secs ~ 4 Min 15 Secs
1 Secs
60 Secs
6-2-9 BT Pairing
Set up Bluetooth Pairing by scan barcode.
Procedure is Scan “Enter” and “ BT Pairing” barcode.
*ZPAR*
Procedure:
(A) Scan “Enter” Barcode
(B) Scan “BT Pairing” Barcode
Procedure
Example
(A) Scan “Enter” barcode
(B) Scan “Stand by time” barcode
(C) Scan parameters from
Hexadecimal / Decimal table
(D) Scan “OK“ barcode
(E) Scan “End” barcode
If configuration is 1 minutes, the
parameter value is
1 min / 1 sec = 60
6-2-9 BT Pairing
6-2-8 Stand by Time