Candy CTAS 120, Maintenance Manual, Page: 6 / 7

USE OF THE SELECTION CONTROLS
41
C
. SPIN REGULATION BUTTON
This key selects the spin speed for the last rinse.
When it is pressed, the display shows the options permitted under the
programme selected.
The display reads 0 for no spin and a sequence from 4 to 12 for speeds of 400 to 1200 rpm.
For cotton programmes the options available are 1200 to 400 and 0 (no spin).
For mixed/ synthetics programmes the options are 800 to 400 and 0 (no spin).
For delicates programmes the options are 800 to 400 and 0 (no spin).
For wool programmes the options are 800 to 400 and 0 (no spin).
For the hand wash programme the options are 800 to 400 and 0 (no spin).
For the rinse programme the options are 800 to 400 and 0 (no spin).
For the spin programme the options are 1200 to 400 and 0 (no spin).
For the emptying programme there is no spin option.
For the Mix & Wash System programme the options are 1000 to 400 and 0 (no spin).
For the 32 minute cycle programme the options are 800 to 400 and 0 (no spin).
I
. DELAYED START BUTTON
From 0 to 23 hours. Available on all programmes. When this button is pressed
the display shows the number of hours’ delay before the programme starts.
The delay increases by one hour each time the key is pressed.
G
. DOOR SECURE/DOOR LOCK LAMP
H
. START/PAUSE BUTTON