12
12
CONNECTING THE COOKTOP TO THE GAS SUPPLY
The gas connection fitting (fig. 2.1) is made up of:
•
the floating nut;
•
the elbow;
•
the gaskets;
The gas connection must be carried out by an authorised person according to the
relevant local standards.
•
If using a flexible hose, make sure it does not come into contact with moving parts.
•
The rear of the chassis is recessed to provide a channel for the appliance inlet pipe.
•
The gas connection fitting can be turned in the direction required (but never in a vertical
or horizontal position) after loosening the elbow and floating nut connection.
•
Never attempt to turn the elbow without having first loosened the floating nut.
•
The supplied gaskets guarantee a good seal for the gas connection. We recommend
that you replace the gaskets on the slightest sign of wear, deformation or imperfection.
•
After connecting to the gas mains, check that the couplings are correctly sealed, using
soapy solution, but never a naked flame
.
Fig. 2.1
Gasket
Floating nut
Appliance inlet pipe
Rigid pipe or flexible
hose
Gasket
Elbow
ISO 228-1 (male) 1/2”
cylindrical
ISO 228-1 (male) 1/2”
cylindrical
Summary of Contents for CHW32X LPG
Page 18: ...18 18...
Page 19: ...19 19 Advice for the users...
Page 27: ...27 27 Fig 3 1 Fig 3 2 Fig 3 3 Fig 3 4 Fig 3 5 S F C T A B S T...
