Never use a spray cleaner to clean the door panel for it could damage the door lock and electrical components. Do not use abrasive
agents because of the risk of scratching or leaving spots on the stainless steel surface.
To clean the edge around the door, you should use only a soft warm, damp cloth. To prevent
penetration of water into the door lock and electrical components, do not use a spray cleaner
of any kind.
Also, never use abrasive cleaners or scouring pads on the outer surfaces because they will
scratch the finish. Some papers towels can also scratch or leave marks on the surface.
Occasionally, items can get into the filter and drain pump. If this occurs, the drainpumps
fitted in your dishwashers are designed to automatically reverse, ejecting the item back
into the sump area or down the drain. If you have to remove an obstacle from the drain
pump, before you remove the filters, you should turn off the power; Then remove the small
black insert from the sump area. (You might want to remove any standing water first). Scoop
out the item that is probably in the sump area and causing the obstruction. Remember to
replace the black insert before you put the filters back in.
After every wash, turn off the water supply to the
appliance and leave the door slightly ajar so that
moisture and odors are not trapped inside.
Before cleaning or performing maintenance, always
remove the plug from the socket. Do not run risks.
To clean the exterior and rubber parts of the dishwasher,
do not use solvents or abrasive cleaning products.
To remove spots or stains from
,
use a cloth dampened with water and a little white
vinegar, or a cleaning product made specifically
for dishwashers.
Instead, use a cloth with warm soapy water.
the interior surface
When you go on holiday, it is recommened that you run a
wash cycle with the dishwasher empty and then remove
the plug from the socket, turn off the water supply and
leave the door of the appliance slightly ajar. This will help
the seals last longer and prevent odors from forming
within the appliance.
If the appliance must be moved, try to keep it in the vertical
position.If absolutely necessary, it can be positioned on
its back.
One of the factors that cause odors to form in the
dishwasher is food that remains trapped in the seals.
Periodic cleaning with a damp sponge will prevent this
from occurring.
9
3
step 3： lift the Fine filter
up
To remove the filter follows steps 1-3, to insert the filter reverse the procedure.
NOTE：
Summary of Contents for CDI 1012-2-80
Page 1: ...CDI1012 2 80 ...
