If your dishwasher is left in an unheated place during the winter, ask a service technician to:
Cut off electrical power to the dishwasher. Remove
fuses or trip circuit breaker.
Turn off the water supply and disconnect the water
inlet pipe from the water valve.
Drain water from the inlet
and water valve.
pipe
(Use a pan to catch the water.)
Reconnect the water inlet
to the
water valve.
pipe
Remove the plastic sump cover in the
bottom and use a sponge to soak up
water in rubber boot.
5
4
3
2
1
It is necessary to clean the spray arms regularly as hard water chemicals will clog the spray arm jets and bearings. To remove the
spray arm, screw off the nut to take out the washer on top of the spray arm and remove.
use a soft brush to clean the jets.
Wash the arms in warm soapy water and
Replace after rinsing them thoroughly.
8
1
2
3
The filter system consists of a filter cylinder(Coarse filter),
A flat (Main filter) and a microfilter(fine filter).
Food and dirt particles trapped by this filter are pulverized by a
special jet on the lower spray arm and washed down the drain.
Larger items, such as pieces of bone or glass, that could clog
the drain are trapped in the coarse filter. To remove an item
caught in the filter, gently squeeze the taps on the top of the
Main filter
Coarse filter
This filter holds soil and dirt residue in the sump area and
prevents it from being redeposit on the dishes during a cycle.
Fine filter
-Inspect the filters for obstructions every time the dishwasher has been used.
-By unscrewing the filter cylinder.you can remove the filter system.Remove any food remnants and
clean the filters under running water.
1
2
Step１：rotate the filter cylinder, and
then lift it up;
step２：lift the Main filter up
fifter and lift it out.
Summary of Contents for CDI 1012-2-80
Page 1: ...CDI1012 2 80 ...
