Candy Brava CDPMN 4S622PX/E, Manual

Page: 106 / 164

106

Open the door and place dirty dishes
inside the appliance.
 Either " ECO " programme will appear on
the display, or the programme that was
previously stored.
 The duration of the programme will be
displayed to the left of the square, while
the programme temperature will be
displayed to the right.

Select the desired programme by pressing
the "PROGRAMME SELECTION" button
several times.

Icons will light up on the display upon
enabling certain programmes.

To select an option, press the
corresponding button (the indicator light
will turn on).

Press the "START/RESET" button.
When the door is shut, after an audible signal
has sounded, the programme will start
automatically. The display will show the
time remaining to the end of the wash cycle.
Models with Smart Loading Sensor (Only
on some models).
The "AUTO WASH" programme, thanks to
an algorithm that analyses the degree of
dirtiness of the dishes in real time,
automatically sets the ideal temperature and
washing time, optimising water and electricity
consumption
Models with dirt sensor
(Only on some models).
The dishwasher is equipped with a
dirt
sensor , capable of analysing water murkiness
during all "AUTOMATIC" programme phases
(see programme legend) .
Thanks to this device, the wash cycle
parameters are automatically adapted to
the real quantity of dirt on dishes.
This is because water murkiness is linked to
the quantity of dirt on dishes.
Thus, excellent washing results are
guaranteed while optimising water and
energy consumption.
The "IMPULSE" programmes use an
impulse washing technology, which reduces
consumption and noise, and improves
performance
.
When the programme starts , you should
only open the door and add more dishes
when the "ADDISH" indicator light is
switched on.
The appliance will stop automatically and
the time remaining to the end of the cycle
will flash on the display.
Close the door, without pressing any
buttons
.
"ADDISH" (possibility of adding
dishes after the programme has
started)
The “intermittent” working of the
washing pump is NOT to be
considered a malfunction; it is a
characteristic of impulse washing,
and therefore should be considered a
normal feature of the programme.
"IMPULSE" programmes
"AUTOMATIC" programmes
After switching on the dishwasher,
wait a few seconds for the programme
to start running.
Programme settings