Candela Corporation
M
GentleLASE
Aiming Beam Alignment Procedure
8503-01-0828, Revision 01
PROPRIETARY
Page 1 of 4
MGentleLASE
Page 1: ...Candela Corporation MGentleLASE Aiming Beam Alignment Procedure 8503 01 0828 Revision 01 PROPRIETARY Page 1 of 4 MGentleLASE Aiming Beam Alignment Procedure...
Page 2: ...MGentleLASE Aiming Beam Alignment Procedure Candela Corporation Page 2 of 4 PROPRIETARY 8503 01 0828 Revision 01...
Page 3: ...SABLE FROM THE TOGGLE SCREEN PULSING ONCE THEN ENTERING STANDBY THERE WILL STILL BE ABOUT 150 V ON THE FLASHLAMP CATHODE THIS MUST BE DISCHARGED WITH THE DISCHARGE STICK ALWAYS MEASURE THE VOLTAGE AT...
Page 4: ...MGentleLASE Aiming Beam Alignment Procedure Candela Corporation Page 4 of 4 PROPRIETARY 8503 01 0828 Revision 01...
