Chapter 6 Print Menu
6. Print Menu
The front panel Print key provides access to a print menu where all print functions of
the iMatic are available. In many cases a report will automatically be printed when a
procedure is run. If an additional report must be printed without recounting samples,
and the sample data is still stored in the iMatic, the report can be selected and printed
from this menu.
The iMatic has on board, battery backed-up storage for 500 samples. Keep in mind that
for each batch counted, an additional record is used for the “Group Done” indicator. In
order to prevent sample data from being inadvertently over-written, if the device
detects that the selected procedure’s iteration will exceed the 500 record limit, the
iMatic will halt operation and display an “Insufficient Memory” error message.
PRINT MENU
1 Most Recent Grp
2 All Grps
3 Select Grp/Rpt
4 System Reports
Print Most Recent Group
The most recent group of samples counted will be printed using the report template
selected in the counting procedure used to count this group of samples.
1.
Press the
key.
2.
Move the “>” cursor to “1 Most Recent Grp” and then press
Enter
.
PRINT MENU
> 1 Most Recent Grp
Printing Report
Press Cancel to
Terminate
PRINTER FAULT
1 Re-try
2 Cancel Print
3 Printer OFF
Report Completed
Press Cancel
2 ALL Grp
3 Select Grp/Rpt
4 System Reports
80
iMatic Automatic Counting System User's Manual - 9239221K
