8
Brine Valve
Connector
Detail
Optional
Overflow
Assembly
AC 120V/10A
Current Protect
Socket
Inlet
Outlet
3/8” Brine
Tube
5/8” Drain
Line
5/8”
Overflow
Line
Laundry
Drain
INSTALLATION INSTRUCTIONS
(CONTINUED)
6.
Using the Allen Key (included), place the unit in the bypass position. Slowly turn on the main water supply. At the nearest cold treated water
tap nearby remove the faucet screen, open the faucet and let water run a few minutes or until the system is free of any air or foreign material
resulting from the plumbing work.
7.
Make sure there are no leaks in the plumbing system before proceeding. Close the water tap when water runs clean.
8.
Open the brine tank / cabinet salt lid and add water until there is approximately 3” (75 mm) of water in the tank. Do not add salt to the brine
tank at this time.
9.
Proceed to start up instructions.
Note: The unit is not ready for service until you complete the start-up instructions.
Summary of Contents for 95STS
Page 2: ......
