LPL22A30
LPL14A30
LPL24A40
07/20
LED
PANEL LIGHT
!
INSTRUCTIONS PERTAINING TO RISK OF FIRE OR INJURY TO PERSONS
READ ALL INSTRUCTIONS
IMPORTANT SAFETY
INSTRUCTIONS
SAVE THESE INSTRUCTIONS
INSTALLATION OR ASSEMBLY INSTRUCTIONS:
SAFETY PRECAUTIONS:
1-800-265-1833 (English) / 1-800-567-2513 (French)
Monday through Friday 8:00 AM to 5:00 PM E.S.T.
TOOLS AND MATERIALS REQUIRED:
Questions or Concerns Contact At The Following Phone Numbers Before Returning Product To The Store:
Phillips
Screwdriver
Scissors
Gloves
Safety
Goggles
Drill
1. TURN OFF ELECTRICAL POWER BEFORE STARTING INSTALLATION OF LIGHT FIXTURE.
2. WIRING SUPPLIES AS REQUIRED BY LOCAL ELECTRICAL CODE.
3. THIS PRODUCT MUST BE INSTALLED IN ACCORDANCE WITH THE APPLICABLE INSTALLATION CODE
BY A PERSON FAMILIAR WITH THE CONSTRUCTION AND OPERATION OF THE PRODUCT AND THE
HAZARDS INVOLVED.
4. CONSULT A QUALIFIED ELECTRICIAN TO ENSURE CORRECT BRANCH CIRCUIT CONDUCTOR.
5.
WEAR GLOVES AND SAFETY GOGGLES AT ALL TIMES WHEN REMOVING LUMINAIRE FROM CARTON,
INSTALLING, SERVICING OR PERFORMING MAINTENANCE.
6.
TO CLEAN THE FIXTURE, TURN OFF THE POWER, WAIT FOR IT TO COOL, AND WIPE THE FIXTURE WITH A
CLEAN, SOFT CLOTH.
NOTE: Product may not look exactly as shown in pictures.
Installation Manual for Back Lit Flat Panels – Three
Options
OPTION I. Installation: Recessed
1. Remove the ceiling tile at
an appropriate location where
the product is to be installed
and raise the product above
the bar.
2. With power turned off at
the breaker, connect power
to driver based on wiring
diagram.
3. Fold the 4 protection
brackets so they will be
above the T-bar as shown.
4. Slowly rest the luminaire
on the T-bar and make sure
it fits appropriately.
1
Wiring diagram 1
)
Gray(-)
0-10V / LED Driver
DIM+
DIM-
0-10V Dimmer
GND (Yellow/Green)
L (Black)
N (White)
L
N
120 ~277Vac
