6 Installation
11 / 30
2) Knock expansion anchors into the corresponding four holes, and then fix the
wall-mounting bracket to the wall with self-tapping screws, as per FIG. 6-7 & FIG. 6-8.
FIG.6-7 Install Expansion Anchors FIG.6-8 Fix Wall-mounting Bracket
6.3 Installing Inverter
Note: Must make sure the wall-mounting bracket has mounted on the wall firmly before
install inverter.
Procedure:
1) Hang the inverter on wall-mounting bracket. Keep balance during the operation to
prevent device damage from colliding with walls or obstacles, as per FIG. 6-9.
FIG. 6-9 Hang the Inverter on Wall-mounting Bracket
2) Use two safety bolts to fix both sides of inverter to ensure the inverter fixed to the wall
firmly, as per FIG. 6-10.
FIG. 6-10 Fix Both Sides of Inverter
