PARTS TO BE INSTALLED
rbl2013-002-003_a
1. Cable retaining clips
Low Beam Headlight
Connection
Models with Low Beam Headlights
Mounted in Cargo Module
1. Connect wiring harness to low beam head-
lights.
rbl2008-003-215_b
1. Low beam headlight connector
2. Verify low beam headlights aiming. Refer to
LIGHTS
in
SETUP
.
Horn Connection
1. Connect horn connector.
2. Route cable through the retaining guide clips
(LH side of cargo module).
rbl2013-002-007_a
1. Horn connector
Models with Low Beam Headlights
Mounted in Cargo Module
If necessary, remove horn from vehicle to ease
connector installation.
rbl2009-001-003_a
TYPICAL - HORN RETAINING BOLT LOCATION
Latch Release Cable, Front
Storage Compartment Cover
1. Feed the latch release cable through the latch
base eyelet.
2. Attach latch release cable end to latch lever
tongs.
3. Using pliers, squeeze lever tongs together to
prevent cable from coming out of latch release
lever.
18 / 41
2014-3
PREDELIVERY
