UNCRATING
rbl2010-002-016
TYPICAL
NOTICE
Never lift vehicle by the suspension
arm.
Alternate Method
1. Install proper straps with hooks on RH and LH
lateral supports of vehicle.
NOTE:
Insert hooks through the holes in the
frame.
rbl2013-003-005_a
TYPICAL
1. Strap
2. Hook
3. Frame
2. Hook straps on an appropriate lifting kit.
3. Lift vehicle using a chain block.
NOTICE
Never lift vehicle by the suspension
arm.
Front Wheels Installation
1. Clean front and rear brake discs.
NOTICE
A thin layer of anticorrosion treat-
ment is present on the brake discs and must
be removed before using the vehicle. Not con-
forming to this procedure may lead to a brake
chattering squeaking and brake pad replace-
ment would be necessary.
BRAKE DISC CLEANING
SERVICE PRODUCT
REQUIRED TOOL
XPS BRAKES AND
PARTS CLEANER (CAN)
(P/N 219 701 776)
XPS BRAKES AND
PARTS CLEANER (USA)
(P/N 219 701 705)
Shop rag
NOTE:
An equivalent brakes and parts cleaner that
is respectful of all laws and regulations in your
area may be used.
2. Remove nut securing front brake discs to vehi-
cle.
rbl2013-003-006_a
TYPICAL
1. Nut to remove, both sides
3. Install front wheels on vehicle.
NOTE:
Ensure that the rotation direction shown by
the arrow on the tire is respected.
WARNING
The tires are only designed to rotate in one di-
rection. Do not switch the left and right front
wheels.
4. Hand tighten wheel lug nuts snug (from PDI kit).
5. Lower vehicle on crate base.
6. Remove the floor jack (or hoist and lifting strap).
PREDELIVERY
2014-3
9 / 41
