Can-Am Spyder RT, Operator'S Manual, Page: 16 / 195

PRIMARY CONTROLS
SM6 Models and SE6 Base Model
rmo2010-001-037_a
1. Brake pedal
2. Footrest
NOTE: When riding, make sure not
to lean your foot on brake pedal. Oth-
erwise, the engine management will
activate the limp home mode to pro-
tect the braking system.
RT-S and RT LTD SE6 Models
rmo2013-005-015_a
NORMAL CONDITION
1. Brake pedal
2. Floorboard
A mechanism allows the floorboard to
lower if the pedal needs to be pressed
more than normal. If that occurs, push
on the rear portion of the floorboard un-
til it clicks and test the braking system.
rmo2013-005-016_a
LOWERED FLOORBOARD
1. Floorboard
If this condition persists or if you find
any braking system problems, refer to
an authorized Can-Am roadster dealer.
7) Parking Brake Switch
The parking brake switch is located
above the glove box. It allows to en-
gage or release the electric parking
brake.
rmo2015-001-103_n
1. Parking brake switch
NOTE: To apply or release the parking
brake, the ignition key must be turned
ON.
NOTE: The battery voltage must be at
10.5 V minimum to activate the parking
brake. If voltage is below 10.5 V, the
parking brake indicator lamp will turn
ON.
Applying Parking Brake
With the vehicle stopped, press switch
to apply the parking brake. The brake
indicator lamp will flash.
14
______________