Can-Am Spyder RT, Operator'S Manual, Page: 148 / 195

MESSAGES IN MULTIFUNCTION GAUGE
Important information about vehicle condition is displayed on the multifunction
gauge. When starting the engine, always look at the gauge for any indicator lamps
or special messages.
INDICATOR LAMPS (MALFUNCTIONS)
INDICATOR
LAMP(S)
DIGITAL
INDICATOR
DIGITAL
WARNING
CAUSE WHAT TO DO
N R
FLASHING
E displayed
instead of
selected gear
NONE
Gearbox
position
sensor
malfunction
Stop vehicle and
allow to reach neutral.
Have the vehicle repaired
by an authorized Can-Am
roadster dealer.
NONE KEY ERR
Wrong or
defective key
Use the right key for the
vehicle or contact an
authorized Can-Am roadster
dealer.
ON
NONE NONE
Engine is
overheating
– Stop and wait for engine
to cool off.
– Check for leaks.
– Check coolant level and
adjust (see MAINTE-
NANCE PROCEDURES
subsection).
ON
NONE NONE
Low or
high battery
voltage
– Recharge battery
(see MAINTENANCE
PROCEDURES
subsection).
– Check battery connections.
Have the vehicle transported
to the nearest authorized
Can-Am roadster dealer.
ABS
ON
NONE NONE
ABS
malfunction.
No ABS
operation
Have the vehicle transported
to the nearest authorized
Can-Am roadster dealer.
ON
NONE NONE
VSS
malfunction
* Have the vehicle
transported to the nearest
authorized Can-Am roadster
dealer.
BRAKE
FAILURE OR
!
BRAKE
FAILURE
EBD
malfunction
Have the vehicle transported
to the nearest authorized
Can-Am roadster dealer.
!
ON
BRAKE
FAILURE OR
!
BRAKE
FAILURE
- LOW
BRAKE
FLUID
Low brake
fluid level or
faulty sensor
– Check for brake fluid leaks.
– Check brake fluid level and
adjust (see
MAINTE-
NANCE PROCEDURES
subsection).
146
______________