Can-Am Spyder RT, Operator'S Manual, Page: 130 / 195

MAINTENANCE PROCEDURES
For best performance, use the LONG
LIFE ANTIFREEZE (P/N 219 702 685)
or equivalent.
With the engine cold, check the
coolant level as follows:
1. Park the vehicle on a firm, level sur-
face.
2. Open the front storage compart-
ment cover.
3. Remove the plastic rivet from the
right service cover.
rmr2010-038-021_a
1. Right service cover
2. Plastic rivet
4. Pull down the service cover using
the recess to release upper tabs
from the front fascia.
rmr2010-038-061_a
5. Pull out the rear tab.
6. Lift service cover to remove it.
NOTICE
Pay attention not to dam-
age the FCS switch.
7. Check the coolant level on the right
hand side. Coolant must be visible
slightly above the COLD level mark.
NOTE: If engine is hot, coolant must
be visible without exceeding the HOT
level mark.
rmo2014-005-010_a
1. Coolant reservoir cap
8. If required, add coolant until it is vis-
ible in the reservoir slightly above
the COLD level mark. Use a funnel
to avoid spillage.
Do not overfill.
9. Stop adding coolant once coolant
starts to appear in the tube.
rmo2014-001-003_a
1. HOT coolant level reference line
10. Reinstall the service cover.
NOTE: A coolant system that fre-
quently requires coolant indicates
leaks or engine problems. See an au-
thorized Can-Am roadster dealer.
128
______________