Can-Am Spyder RT, Operator'S Manual, Page: 121 / 195

MAINTENANCE SCHEDULE
INITIAL INSPECTION - 5 000 KM (3,000 MI)
Check fault codes.
Replace engine oil and oil filter.
Check clutch fluid level (SM6 model only) .
Check brake fluid level.
Check reverse mechanism operation.
Check engine coolant level.
Inspect throttle twist grip operation.
Check lighting system (brake light, hazard warning light, turn signal lights, position
lights, license plate light). Clean brake light switch.
Check operation of control switches.
Inspect the drive belt condition and its tension. Adjust if required.
Check tightening torque of the front wheels lug nuts.
Check tightening torque of the rear wheel axle nut.
Check parking brake operation. Adjust as required.
Check wheels wear. Align front wheels if required.
Check tires pressure. Adjust as required.
Check brake pads and discs condition.
Check passenger handholds looseness.
Check footrests looseness.
Check body panels looseness.
Check operation of storage compartment latches, hinges and key barrels.
EVERY 1 500 KM (1,000 MI)
Check oil level.
EVERY 15 000 KM (9,300 MI) OR 1 YEAR (WHICHEVER COMES FIRST)
Check fault codes.
Replace engine oil and oil filter.
Check clutch fluid level (SM6 model only) .
Check brake fluid level. Replace every 2 years.
Check brake hoses
Check reverse mechanism operation.
______________
119