SETUP
2. If test fail, proceed as follows:
2.1 Loosen screws on the top of rear panel.
2.2 Push and hold rear panel forward.
2.3 Tighten screws on the top of rear panel.
rmo2010-001-090_d
1. Screws on the top of rear panel
3. If proper adjustment cannot be obtained, pro-
ceed as follows:
3.1 Slightly loosen one latch retaining screw.
3.2 Adjust latch position accordingly.
3.3 Tighten latch retaining screw.
3.4 Proceed the same way for the other
screw.
rmo2010-001-090_e
1. Latch retaining screws
NOTE:
Do not remove latch retaining screws com-
pletely as the latch will fall into vehicle.
Clock and Language Setting
NOTE:
It is normal that the
check engine
indicator
lamp is displayed while the clock is adjusted.
Use the RECC (Roadster Electronic Command
Center) to control the display functions.
rmo2010-001-020_a
1. RECC
Pressing the MODE button will move a selection
through the category icons, located at the top left
area of the screen, in this order: Default riding
screen, Audio, CB, Trip meter and Preferences.
Each press of the button will move the selection
to the next available icon. When an icon is se-
lected, its related screen will appear.
NOTE:
The audio and CB icons are skipped when
the vehicle is not equipped with these features.
The Preferences screen is skipped when the ve-
hicle is above 5 km/h (3 MPH), except for the SE6
model for the towing mode.
1
2
rmo2010-001-015_ben
1. Category icons
2. Default riding icon selected
In the preferences screen, select the appropriate
category.
PREDELIVERY
2014-1
47 / 52
