Can-Am Roadster RT-622 2010, Service Manual, Page: 38 / 52

Section 02 CHASSIS
Subsection 03 (BODY)
8. Remove 8 retaining screws attaching body to
frame.
rmr2010-067-005_a
1. Retaining screws
9. With an assistant, carefully lift trailer body sec-
tion. Grab section under wheel fender.
NOTICE
Do not lift body using the fiberglass
over the bridge section as an attachment point.
rmr2010-067-012
GRAB UNDER WHEEL FENDER
10. Remove body from trailer frame and lay on
a flat surface to avoid damaging painted sur-
faces.
rmr2010-067-015
CAREFULLY LAY ON A FLAT SURFACE
Body Installation
1. Put a small amount of
XPS SYNTHETIC GREASE
(P/N 293 550 010)
on the 8 rubber washers
rmr2010-067-019
WASHER WITH GREASE
2. Place washers on frame.
rmr2010-067-016_a
1. Washers
28
rmr2010-066