Can-Am Rally 200, Operator'S Manual, Page: 75 / 140

V06F04Y
4 1
3
2
1. Align this pointer toward the desired position
2. ON position
3. OFF position
4. RES position
OFF
Stops fuel supply to carburetor.
CAUTION: Turn valve to OFF posi-
tion when vehicle is not being op-
erated or when transporting.
ON
Allows fuel to flow to carburetor. This
is the normal position for operation of
the vehicle.
RES (RESERVE)
When fuel is exhausted in the fuel tank
when in the ON position, an emergen-
cy supply of fuel is available by turn-
ing the tab to RES. The reserve con-
tains approximately 30% of the fuel
tank capacity. Use only this position
when the ON supply is empty.
When down to the reserve, refuel as
soon as possible. Ensure to turn the
valve back to the ON position after re-
fuelling.
CAUTION: Improper opening of fu-
el valve will restrict the flow of fu-
el. Make sure valve is fully opened
while running.
11) Rear Brake Pedal
Located on the right footrest. When
pressed down, the rear brake is ap-
plied. When released, it should return
to its original position. Braking effect
is proportional to the force applied on
the pedal and to the type and condition
of the terrain.
V06K11Y
1
1. Rear brake pedal
12) Footpeg
Located on footrest. Use this area to
maintain your feet stable.
V06L01Y
1
1. Footpeg
13) Tool Kit
Located at the rear of vehicle, under
bumper. The tool kit contains tools for
basic maintenance and this Operator's
Guide.
_____________________
73