Can-Am MAVERICK X3 Series 2017 Operator'S Manual Download Page 51

Page: 51 / 155

MULTIFUNCTION GAUGE (ANALOG/DIGITAL)

5) Indicator Lamps

Indicator lamps will inform you of various conditions or problems.

An indicator lamp can flash alone or in combination with another lamp.

INDICATOR LAMP(S)

DESCRIPTION

All indicator lamps

All indicator lamps are activated when D.E.S.S. key
is installed and the engine is not started

Low fuel

Check engine

High engine temperature

Headlights in the HIGH beam position

Brake pedal is depressed for more than 15
seconds

Operator seat belt is not properly latched.
Engine output will be limited, reducing
the speed and operability of the vehicle.
Main digital display: FASTEN SEAT BELT

SPORT

MODE

Sport mode activated

ECO mode activated

6) Main Digital Display

Displays useful real-time information to the rider.

7) Multifunction Display

The vehicle speed or the engine revolutions (RPM) can be displayed. See

MODE

(M) BUTTON

in this section.

Important messages can also be displayed. Refer to table below.

If an abnormal engine condition occurs, a message can be combined with a pilot
lamp. Refer to

TROUBLESHOOTING

section for details.

_______________

Summary of Contents for MAVERICK X3 Series 2017




























































































































































Search results

Summary of Contents for MAVERICK X3 Series 2017

Reviews:

Can-Am MAVERICK X3 Series 2017, Operator'S Manual, Page: 51 / 155

Search results

Summary of Contents for MAVERICK X3 Series 2017

Reviews: