Can-Am MAVERICK X3 Series 2017, Operator'S Manual, Page: 44 / 155

PRIMARY CONTROLS
Park
The park position locks the gearbox to
help prevent vehicle movement.
WARNING
Always use the PARK (P) position
when the vehicle is not in oper-
ation. The vehicle can roll if the
shift lever is not set to P (PARK).
Reverse
The reverse position allows the vehicle
to go backwards.
NOTE: In reverse operation, the en-
gine's RPM is limited, thus limiting the
vehicle reverse speed.
WARNING
When driving downhill in reverse,
gravity can increase the vehicle
speed above the set limited re-
verse speed.
Neutral
The neutral position disengages the
gearbox.
High Range (Forward)
This position selects the high speed
range of the gearbox. It is the normal
driving speed range. It allows the vehi-
cle to reach its maximum speed.
Low Range (Forward)
This position selects the low speed
range of the gearbox. It allows the ve-
hicle to move slowly with maximum
torque at the wheels.
NOTICE
Use the low speed range
to pull a trailer (if equipped with
hitch), carry heavy cargo, go over
obstacles or drive uphill and down-
hill.
42
______________