Can-Am 2018 Defender Series, Operator'S Manual

Page: 109 / 187

MAINTENANCE PROCEDURES
vmr2006-008-001_a
1. Slightly oil
2. Slightly oil
Install the cover on the engine.
Tighten oil filter cover screws to rec-
ommended specification.
TIGHTENING TORQUE
Oil filter cover
screws
10 N•m ± 1 N•m
(89 lbf• in ± 9 lbf• in )
Radiator
Radiator Inspection and Cleaning
Periodically check the radiator area for
cleanliness.
To access radiator, lift front service
cover and remove both plastic rivets
securing front grille to vehicle.
tmo2016-010-167_a
PLASTIC RIVETS TO REMOVE
Inspect radiator and hoses for leaks or
any damage.
Inspect radiating fins. They must be
clean, free of mud, dirt, leaves and any
other deposit that would prevent the
radiator to cool properly.
If available, use a garden hose to rinse
the radiating fins.
CAUTION Never clean radiator
with your hands when it is hot. Let
the radiator cool down before clean-
ing.
NOTICE
Be careful not to damage
the radiating fins when cleaning. Do
not use any object/tool that could
damage the fins. When hosing, use
low pressure only. Never use a HIGH
PRESSURE washer.
Engine Coolant
Engine Coolant Level Verification
WARNING
Check coolant level with engine
cold.
1. Place vehicle on a level surface.
2. Open cargo box.
219001807-008
3. Remove the pressure cap.
WARNING
In order to avoid potential burns,
do not remove the pressure cap if
the engine is hot.
4. Ensure cooling system is full up to
the Max line.
______________
107