Camus ProtoNode Start-up Guide
Page 31 of 87
5.2 Connecting to the ProtoNode Web Configurator
After setting a local PC on the same subnet as the ProtoNode (
), open a web browser on the
PC and enter the IP Address of the ProtoNode; the default address is 192.168.1.24.
NOTE: If the IP Address of the ProtoNode was changed, the assigned IP Address can be
discovered using the FS Toolbox utility. See
for instructions.
5.3 Selecting Profiles for Devices Connected to ProtoNode
NOTE: If Modbus TCP/IP was selected in Section
for the Field/BMS protocol, skip this section.
Device profiles are NOT used for Modbus TCP/IP.
•
In the Web Configurator, the Active Profiles are shown below the Configuration Parameters. The
Active Profiles section lists the currently active device profiles, including previous Web Configurator
additions. This list is empty for new installations, or after clearing all configurations. (
