CPB-515 Operation and Maintenance Manual
– TTS 45, 70, 80,100, 110 Series (10-2017)
9
If additional distances are required, a 30 minute cool down period is recommended before
transport is resumed. Absolute speed and duration levels may vary, depending on system
type and ambient conditions. Limitations as listed, help avoid system heat buildup that
could cause reduction in track life.
3.6 Minimum Turning Radius Limitations
Camso track systems operate best when running straight or in gentle turns. If a track
system is pivot or spot turned, the opportunity exists for soil and dirt to be ingested into
the system. Even though TTS has a tension recoil system, if that tension recoil is
exceeded, high loads in the frame and track can be generated which may cause track or
system damage, Camso recommends that minimum turning radius limits be strictly
observed, both in the field, and also on hard ground or pavement, to avoid high stresses
due to debris ingestion, potential untracking situations, high twisting and side loads, and
significant ground scrubbing of the track treads, especially if such a turn is attempted with
fully loaded or folded systems.
Operating
Condition
Minimum Turning Radius
Field or Road
3 x the overall length of the t implement
