OPTION B. Change IP camera settings
Log in and go to IP camera configuration. Then change the camera configuration to the
one in the recorder (Configured IP camera by default in the Recorder). After changing the
settings to be compatible with the recorder module, it will establish connection with the
camera.
C) Formatting and configuring memory storage
You can check the status of the memory storage connected to the recorder in the
Config
> System > HDD
. Just after installing the new storage medium, please format it.
WARNING
Formatting a storage media erases all data from it!
Select a newly connected storage from the list and then click Format. After properly done
formatting, the device will restart. The "Normal" message will be displayed in the Status
column.
Page 32
